What is going on??!! Log Out | Topics | Search
Moderators | Edit Profile

Ibanez Collectors World » Vintage & Custom Electrics (1970s Only) » What is going on??!! « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Ibanezkid
Username: Ibanezkid

Registered: 6-2007
Posted on Wednesday, June 13, 2007 - 7:13 am:   

here's another one, sigh. any takers?
Ebay Item #140128036543
Top of pagePrevious messageNext messageBottom of page Link to this message

Ekkerman
Username: Ekkerman

Registered: 7-2004
Posted on Wednesday, June 13, 2007 - 8:27 am:   

brutal!!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Johns
Username: Johns

Registered: 2-2001
Posted on Wednesday, June 13, 2007 - 9:05 am:   

If you're up for a REAL project, it could be fun.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dave_g
Username: Dave_g

Registered: 1-2002
Posted on Wednesday, June 13, 2007 - 8:25 pm:   

John....That neck is unrepairable by any mortal
Top of pagePrevious messageNext messageBottom of page Link to this message

Fingersmcoy
Username: Fingersmcoy

Registered: 10-2006
Posted on Wednesday, June 13, 2007 - 8:40 pm:   

I agree w/ john that could be a nice players guitar!Looks like he has most of the parts!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Johns
Username: Johns

Registered: 2-2001
Posted on Wednesday, June 13, 2007 - 8:43 pm:   

Dave:

Oops, I didn't read the description and missed the part about the curve in the neck. Oh well, still lots of parts up for grabs.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ibanezkid
Username: Ibanezkid

Registered: 6-2007
Posted on Wednesday, June 13, 2007 - 8:52 pm:   

dave_g, you should snag it becaise if anyone can repair it you can and i'm a kid with no money and a room full of yamahasanyway you rescued ''shame'' and did bobzilla's 'unreparable' scruggs so no reason you can't tackle this one
Top of pagePrevious messageNext messageBottom of page Link to this message

Fingersmcoy
Username: Fingersmcoy

Registered: 10-2006
Posted on Wednesday, June 13, 2007 - 9:46 pm:   

Wood is unbendable, or bendable.Maybe a good steam iron would work.But seriously ask a wooden boat builder about bending wood....
Top of pagePrevious messageNext messageBottom of page Link to this message

Ibanezkid
Username: Ibanezkid

Registered: 6-2007
Posted on Wednesday, June 13, 2007 - 10:00 pm:   

fingers, to bend wood you soak it in hot water for an hour or so.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fingersmcoy
Username: Fingersmcoy

Registered: 10-2006
Posted on Wednesday, June 13, 2007 - 11:26 pm:   

yes my son !
Top of pagePrevious messageNext messageBottom of page Link to this message

Jchester
Username: Jchester

Registered: 5-2006
Posted on Wednesday, June 13, 2007 - 11:58 pm:   

...and at least the guy's honest about its condition.

...refreshing, these days.
Top of pagePrevious messageNext messageBottom of page Link to this message

Dave_g
Username: Dave_g

Registered: 1-2002
Posted on Thursday, June 14, 2007 - 12:52 am:   

Fingers, from my experience no amount of steaming or pressure can straighten out a crook in a neck. Those sideways bends are an indication of improperly seasoned/dried timber...a process that takes place way before the construction of the guitar. When a joist gets a crook in in like that it has to be sistered with a straight joist and trimmed or simply discarded.

The only way that guitar is ever going to be a "player" is with a neck transplant...the labor is way too much consitering condition of the rest of the guitar. Perhaps a wall hanger in a resturant or something ? Anyway the parts are worth a bit -they are not in very good shape but consitering the prices vintage parts get these days the parts are worth around $300....
Top of pagePrevious messageNext messageBottom of page Link to this message

Mr_roadstar
Username: Mr_roadstar

Registered: 6-2002
Posted on Thursday, June 14, 2007 - 1:27 am:   

Clamp it down, lay the heat blanket on it, apply gentle pressure, let it cook for several hours, I'd give it a 30% chance of coming back. I've seen a pretty bad twist removed this way.

The Bear
Top of pagePrevious messageNext messageBottom of page Link to this message

Sixvsix
Username: Sixvsix

Registered: 3-2002
Posted on Thursday, June 14, 2007 - 2:49 pm:   

I agree that the seller has been 'straight' (sorry) with potential buyers. I too wouldn't want to take a chance on this poor Gal.

Y'all wait. Next week, an Artist will appear on ebay with a trashed body and we'll be kicking ourselves.

six
Top of pagePrevious messageNext messageBottom of page Link to this message

Shrap
Username: Shrap

Registered: 2-2007
Posted on Thursday, June 14, 2007 - 4:50 pm:   

Looking at the various parts, seems to me this guitar was either exposed to water of high humidity. I see a lot of corrosion on the metal and some residue. Could be water damage that bent the neck ?!?
Top of pagePrevious messageNext messageBottom of page Link to this message

Fingersmcoy
Username: Fingersmcoy

Registered: 10-2006
Posted on Thursday, June 14, 2007 - 6:43 pm:   

Yes shrap thats what i was thinking. Good eye!Lot of areas around the country were expose to extream weather(floods ect.) I think we may see more water damage guitars?
Top of pagePrevious messageNext messageBottom of page Link to this message

Ibanezkid
Username: Ibanezkid

Registered: 6-2007
Posted on Thursday, June 14, 2007 - 7:02 pm:   

fingers,to bend wood you soak it hot water for an hour or so.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sixvsix
Username: Sixvsix

Registered: 3-2002
Posted on Friday, June 15, 2007 - 6:34 am:   

Perhaps the wife drowned him with it and left it sticking out the mud body up....

six
Top of pagePrevious messageNext messageBottom of page Link to this message

Allears
Username: Allears

Registered: 6-2007
Posted on Friday, June 15, 2007 - 8:36 am:   

A Crime Against Guitarmanity

The pictures tell a story of some serious abuse...

Good Grief!

Allears
Top of pagePrevious messageNext messageBottom of page Link to this message

Bobzilla
Username: Bobzilla

Registered: 2-2005
Posted on Friday, June 15, 2007 - 8:40 am:   

How does the moisture get to the wood itself (neck) if the neck is laminated/laquered whatever. If you want to wet it to straighten it, how does the moisture get thru the finish? And... you guys that are confident about that process can stop by the crib and have a go at Satan's guitar anytime. At least mine intonates and plays. You're only aware of the twist when you eyeball it down the neck.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fingersmcoy
Username: Fingersmcoy

Registered: 10-2006
Posted on Friday, June 15, 2007 - 9:26 am:   

Im not going to pretend im a wood Dr.but i dont believe the fret board is laminated.Maybe water seaped in through the truss rod cover also?Or maybe the whole neck was under water for years who knows??
Top of pagePrevious messageNext messageBottom of page Link to this message

Guitarwhisperer
Username: Guitarwhisperer

Registered: 6-2007
Posted on Friday, June 15, 2007 - 10:17 pm:   

I think the guitar was stored uncased in a hot humid attic, or uncased in a basement. Does the auction include a case? A leaky roof or water pipe in the basement would supply the needed humidity into the environment for warpage and corrosion. The humidity would soak through the unfinished fretboard into the neck, and warp the neck. (Living in a humid state, I've had necks backbow upon arrival as the fretboard expanded, and a few weeks later go back to normal as the moisture went into the neck from the fretboard. Ive also seen the effect when gluing fretboards to necks. The more absorbant piece of wood expands slightly more as it absorbs water from the glue, and then a week later returns back to normal, at which point I shape the back of the neck.) The guitar might have been leaning on the neck sideways, introducing the sideways bend. Or, one of the neck laminates was spongier than the other side, and absorbed more water, and swelled farther, increasing the length on that side of the neck, bending it sideways. In this case, I think the attic scenario is more likely, as the attic would build up the neccessary heat to do the damage. I would rule out a flood, due to the fact that the wood hasn't swelled on the body, cracking the finish, the frets are not extremely corroded, the pots don't show water damage, and the pickups aren't green. Neither are the pickup wires. On a technical note, glued-on fingerboards are considered laminates, and could be called laminated fingerboards, as opposed to necks that are one-piece, with the fretboard cut directly into the neck. In this case it is still called a "fret board" even though it is not technically a seperate board.
Top of pagePrevious messageNext messageBottom of page Link to this message

Guitarwhisperer
Username: Guitarwhisperer

Registered: 6-2007
Posted on Friday, June 15, 2007 - 10:20 pm:   

The auction does NOT include a case.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fingersmcoy
Username: Fingersmcoy

Registered: 10-2006
Posted on Friday, June 15, 2007 - 11:13 pm:   

Good observation Guitarwhisper! Your right about the frets being non- corrosive.Throw my theroy out the window.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mr_roadstar
Username: Mr_roadstar

Registered: 6-2002
Posted on Monday, June 18, 2007 - 1:07 am:   

Anybody ever watch an acoustic being built? The sides are heated and formed around a buck. No water is used.

The Bear
Top of pagePrevious messageNext messageBottom of page Link to this message

Guitarwhisperer
Username: Guitarwhisperer

Registered: 6-2007
Posted on Monday, June 18, 2007 - 9:48 am:   

Actually, the sides are misted with water, or sometimes actually soaked for 20 minutes or so. If you don't use water, it takes an excessive amount of time to bend the wood and it burns on the iron. At least that's the case in the ones I've seen built. I know a guy who built an acoustic that was coffin shaped so he wouldn't have to bend the sides. It was wierd looking, but it sounded good. Water isn't absolutely neccesary to bend wood, heat alone will do that, but it definitely speeds up the process.
Top of pagePrevious messageNext messageBottom of page Link to this message

Guitarwhisperer
Username: Guitarwhisperer

Registered: 6-2007
Posted on Monday, June 18, 2007 - 9:51 am:   

There's abook called "Guitarmaking, Tradition and Technology" that anyone interested in building guitars should read. It goes through every step, bit by bit, and doesn't leave anything out the way most books seem to do.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ibanezfreak1960
Username: Ibanezfreak1960

Registered: 3-2004
Posted on Monday, June 18, 2007 - 12:33 pm:   

Let me ask some opinions here. What do you think is harder to bend, solid or laminate woods?
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluesmeister
Username: Bluesmeister

Registered: 5-2004
Posted on Tuesday, June 19, 2007 - 1:19 am:   

'Freak, I would think laminates would be harder to bend, I'm fairly certain laminates are usually laid with the grain running approximately 90 degrees to one another.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ibanezfreak1960
Username: Ibanezfreak1960

Registered: 3-2004
Posted on Saturday, June 23, 2007 - 9:08 am:   

That was my thought also. Thats why I believe laminates make a great beater guitar. Thats what I use to lug around for teaching all year long.
Top of pagePrevious messageNext messageBottom of page Link to this message

Guitarwhisperer
Username: Guitarwhisperer

Registered: 6-2007
Posted on Saturday, June 23, 2007 - 10:45 pm:   

And, they're also harder to warp once bent, so an all laminated guitar makes a better beach guitar. Well, I live near a beach.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Post as "Anonymous"
Enable HTML code in message
Automatically activate URLs in message
Action:


Thank you for supporting Ibanez Collectors Forum. Please help your favorite Ibanez guitar site as we endeavor to bring you the latest information about Ibanez custom vintage electric and acoustic guitars. Here you can discuss ibanez, guitars, basses, acoustics, acoustic, mandolins, electric guitar, electric bass, amplifiers, effect pedals, tuners, picks, pickups.