Author |
Message |
Bobzilla
Username: Bobzilla
Registered: 02-2005
| Posted on Friday, September 02, 2005 - 10:19 am: | |
Just bought AR1200 Doubleneck, there's a recent thread here with photos. Why do they have 2 inputs? Thanx and does anyone have production #'s for 1983? |
Ibanezfreak1960
Username: Ibanezfreak1960
Registered: 03-2004
| Posted on Friday, September 02, 2005 - 8:33 pm: | |
Here is a link to a catalog spec sheet. It says dual outputs so I;m assuming that there is one for each neck and maybe one is mono for both necks. Try it out and see what happens. http://www.ibanezrules.com/catalogs/us/1983_84/roadstar2_artist/p22.jpg |
Bobzilla
Username: Bobzilla
Registered: 02-2005
| Posted on Saturday, September 03, 2005 - 8:51 am: | |
Thanx Freak. |
Bobzilla
Username: Bobzilla
Registered: 02-2005
| Posted on Saturday, September 03, 2005 - 8:55 am: | |
Checked the link. Nothing there. |
Tubescorcher
Username: Tubescorcher
Registered: 03-2004
| Posted on Saturday, September 03, 2005 - 9:56 am: | |
Hey Bob, They have two outputs that spit the necks. Example: you can send the 6 string to your Marshall, and send the 12 to your Jazz Chourus. |
Bobzilla
Username: Bobzilla
Registered: 02-2005
| Posted on Saturday, September 03, 2005 - 10:46 am: | |
Tube.... I considered that. Are you sure? Kinda weird to be on stage with 2 chords going into your guitar. I guess, in a studio recording situation it may make a bit of sense. Are you 100% sure that's the deal with the 2 inputs? and... Thanx. What about the headstock? Should there be 2 neckplates that say "Artist" ? |
Ibanezfreak1960
Username: Ibanezfreak1960
Registered: 03-2004
| Posted on Saturday, September 03, 2005 - 12:43 pm: | |
bob did you try each one independent of eachother to see if one was mono for both necks when using 1 amp? |
Bobzilla
Username: Bobzilla
Registered: 02-2005
| Posted on Saturday, September 03, 2005 - 12:55 pm: | |
Freak... I tried both.... unfortunately, I couldn't discern any difference between the two. I am hoping someone who owns one will chime in and help me out here. What about the neck plates? Should they both say "artist?" Seewhat Tubescorcher syas above? I considered that.... he may be right but I'd like verification. |
Lespaul
Username: Lespaul
Registered: 10-2004
| Posted on Saturday, September 03, 2005 - 1:36 pm: | |
All catalogue (scans) I have seen just say dual outputs. No further explaination. All pictures I have seen show two engraved truss rod covers. Paul |
Bobzilla
Username: Bobzilla
Registered: 02-2005
| Posted on Saturday, September 03, 2005 - 1:42 pm: | |
Thanx Les Paul... I've got my fingers crossed that someone will chime in here with info on those two "output" jacks. anyone got an "Artist" truss rod cover for sale? And... I wonder wha' happened to the original one that was one here then. |
Bobzilla
Username: Bobzilla
Registered: 02-2005
| Posted on Saturday, September 03, 2005 - 2:51 pm: | |
here's the headstock photo, if anyone's got a matching truss rod plate, please lemme know. |
Pitviper
Username: Pitviper
Registered: 08-2005
| Posted on Saturday, September 03, 2005 - 5:39 pm: | |
It's possible the factory used only one "Artist" cover. Look at the screws for signs of removal(yeah it's not a for sure way) but if there are absolutely NO signs of tamper...that a good thing, and lends to originality. Also is the construction of the second blank one "identicial" to the ingraved one?..Front to back, side to side? |
Tubescorcher
Username: Tubescorcher
Registered: 03-2004
| Posted on Saturday, September 03, 2005 - 9:44 pm: | |
Hey Bob, Funny, I was just using Marshall and the Jazz Chourus as an example and it turns out those are the Amps you named in another post!!! Anyway, try routing each output to a different source, then turn the Master volume down and see if you gain individual neck control. |
Steveg219
Username: Steveg219
Registered: 01-2005
| Posted on Monday, September 05, 2005 - 12:29 am: | |
If you plug into one jack you get both, if you plug in both jacks the six string goes to one and the 12 string to the other. This is intended for using one amp for the 6 string and a second amp for the 12 string...BTW I have two AR1200's and both have "Artist" on both truss rod covers. |
Bobzilla
Username: Bobzilla
Registered: 02-2005
| Posted on Tuesday, September 06, 2005 - 9:21 am: | |
Thanx dudes........ I'm a bit confused by the info above.... I will try to figure it out. Is it definite that I should be looking for another truss rod cover? The one on there does not look likes it's an add-on. It looks exactly (almost) like the other one, except for the "Artist" being missing. |
Orval
Username: Orval
Registered: 03-2001
| Posted on Tuesday, September 06, 2005 - 10:37 am: | |
take both covers to the trophy shop, and have them engrave the blank one using the stylus to trace the font in the engraved one. you have nothing to lose and it should be cheaper than finding a replacement. |
Bobzilla
Username: Bobzilla
Registered: 02-2005
| Posted on Tuesday, September 06, 2005 - 10:38 am: | |
Steveg219, thanx. It sound feasible. Are you 100% sure? |
Brentm
Username: Brentm
Registered: 03-2005
| Posted on Wednesday, March 01, 2006 - 2:18 am: | |
Bob, i think this the Artist truss rod cover you're looking for, maybe not the price you were looking for. http://www.qksrv.net/click-1802666-10381315?loc=http://cgi.ebay.com/ws/eBayISAPI .dll%3FViewItem%26item%3D7394947440 |
Fg100
Username: Fg100
Registered: 03-2004
| Posted on Wednesday, March 01, 2006 - 5:01 am: | |
Bob, if you're still confused about the inputs... I have tried an AR1200 and it's right what Tubescorcher and Steveg219 said. Plug in one and you have both necks, plug in two and you'll have each neck independently going to two different amps. Just experiment yourself. Now, two cables going into your guitar is weird.. Well, two necks going into it is already 'kinda weird' if you think, isn’t it? …. Joking.. |
Bobzilla
Username: Bobzilla
Registered: 02-2005
| Posted on Wednesday, March 01, 2006 - 3:06 pm: | |
Thanx Guys. |
Perivroa
Username: Perivroa
Registered: 02-2006
| Posted on Friday, March 03, 2006 - 5:43 am: | |
hi, i got a ar1200 from 1980, but it only got one output, do anyone know wath year they start with two outputs on the ar1200 ??, and do anyone of you doubleneck-owners have a homesite ??, if so, please send a link to me at perivroa@telia.com regards/Per in Sweden... |