Author |
Message |
Rockon2112
Username: Rockon2112
Registered: 3-2007
| Posted on Sunday, April 22, 2007 - 4:25 pm: | |
OK... So I put the 'ol strap on my week old 2619 and after about four hours of collective play time... pop, the strap pin on the horn comes off! Glad I was able to grab the neck and keep it from dropping. It's obvious that there was at some point a larger screw (likely from a straplock system of some kind) screwed into the hole. Seems that about 2/3 of the hole is sloppy from the bigger screw, and the laquer is cracked around the hole because whomever did it didn't bother to pre-drill. Same thing on the butt-end. What's the best way to fix this, and assure it holds... longer screws and a filler? I bought this to play so I don't want to worry about the strap pins coming off! Any suggestions are appreciated! |
Fox
Username: Fox
Registered: 2-2003
| Posted on Monday, April 23, 2007 - 3:38 am: | |
Rockon, a couple matchsticks and good wood-glue should do the trick. Let dry. trim a little with a sharp knife and re-install the strap-button. This point you could install some Schaller strap-lock buttons or equivalent, recommends fox |
|
|
Thank you for supporting Ibanez Collectors Forum. Please help your favorite Ibanez guitar site as we endeavor to bring you the latest information about Ibanez custom vintage electric and acoustic guitars. Here you can discuss ibanez, guitars, basses, acoustics, acoustic, mandolins, electric guitar, electric bass, amplifiers, effect pedals, tuners, picks, pickups.
|