| Author |
Message |
Lespaul
Username: Lespaul
Registered: 10-2004
| | Posted on Sunday, October 08, 2006 - 10:21 am: | |
Hi guys,
I am working on a telecaster rewiring for a friend of mine. He wants a sets of SD in it wired with a 4-way switch (neck, neck and bridge parallel, bridge, neck and bridge series) and I cannot get it done. I used this diagram http://www.guitarelectronics.com/product/WDUSS4L1101:
and the neck pup is on in all positions. Can you help me out?
Thanks,
Paul |
Strings
Username: Strings
Registered: 01-2005
| | Posted on Sunday, October 08, 2006 - 10:59 am: | |
Ooops, ***bump*** more important that it's successor-post |
Ericibanez
Username: Ericibanez
Registered: 09-2003
| | Posted on Sunday, October 08, 2006 - 11:07 pm: | |
check out the seymour duncan website. http://www.seymourduncan.com/support/schematics.shtml Lots of diagrams.
Look in the Humbucker section. This will give you basics layout for series - parallel using 2 dpdt switches (found on push pull pots). You can treat the hot stacks as humbuckers. Using 2 push pulls (get 250Ks or 500Ks)yous should be able to get what you need. www.stewmac.com these guys sell guitar making supplies. You can get a switch from them that has a few more connections than the standard tele 3 way and they have push pulls in various ranges.\Good luck |
Lespaul
Username: Lespaul
Registered: 10-2004
| | Posted on Monday, October 09, 2006 - 5:39 am: | |
Thanks Ericibanez,
I should have told I already have the four way pickup switch (like drawn in the diagram) so for now the pushpulls are not an option. I'll check the humbucker section of SD now.
Paul |
|
|
Thank you for supporting Ibanez Collectors Forum. Please help your favorite Ibanez guitar site as we endeavor to bring you the latest information about Ibanez custom vintage electric and acoustic guitars. Here you can discuss ibanez, guitars, ibanez guitars, basses, acoustics, acoustic, mandolins, electric guitar, electric bass, amplifiers, effect pedals, tuners, picks, pickups.
|